|
楼主 |
发表于 2012-8-4 23:40:55
|
显示全部楼层
原帖由 gaomx 于 2012-8-4 23:32 发表
你看看异步的介绍吧。
自适应本地必须采用恢复时钟跟踪输入时钟防止断流或者溢出,所以如果输入信号定时不好,声音一定不可能好。
恰恰相反,异步采用本地时钟,本地时钟可以做的很好。
主机发送多少数据取决于 ...
The TAS1010B can also accommodate asynchronous isochronous
operation, and the input MCLKI is provided for this case. For asynchronous isochronous operation, the
external clock pin MCLKI is used to derive the data and sync signal to the codec. However, the external
clock that provides the input to pin MCLKI, instead of the master clock output (MCLKO or MCLKO2) from
the ACG, must also source the codec's MCLK.
这是TAS1010B规格书的原文,在异步模式,不是使用PLL来从USB数据流或TAS1010B的晶振中产生时钟,与此相反,这个时钟是来源于外部,通常就是CODEC/DAC的
这个说法,倒是和mini的实际电路比较吻合,mini里面只有一颗22.576M的晶振,显然是给PCM1742的。
但是,我并不觉得这样的模式可以提高音质啊。
回头去看看USBAudio的规格定义。 |
|