|
发表于 2012-12-22 21:20:47
|
显示全部楼层
原帖由 ragers 于 2012-12-22 09:58 发表 
我有ap2了,后面是pass,一定是用xlr输出的。谢谢你的附件,我在网上查到了,可能粗心没看对,再研究一下,谢谢!
仔细看了64确实是2号针是正,和美标一样。你的后端是欧洲机所以可能对你来说是反的。
貌似美标里2号针是负的?
摘自wiki:
Prior to the introduction of this standard, the wiring of pins 2 and 3 varied.
The pin 2 "hot" and pin 3 "cold" convention was typically used by European and Japanese equipment manufacturers(好像什么EIA Standard RS-297里也是这么定义的),
but American companies used pin 3 "hot" and pin 2 "cold".
我觉得Chord这么做就是想让消费者买他家的一套。。。
[ 本帖最后由 lus12 于 2012-12-22 21:23 编辑 ] |
|