|
发表于 2013-1-12 01:45:18
|
显示全部楼层
原帖由 leter15 于 2013-1-11 21:40 发表 
以前的技术要实现恒温比较困难,
现在相对容易一些。
可以将恒温的温度控制在25摄氏度,甚至更低,以尽量减少热噪声。
在Lavry DA924的说明书,已经提及当中使用oven来加热电阻网络以达至稳定工作状态,而不是你所说的用其它方法维持室温。
"2. Warm-up: An internal oven heats up the temperature-sensitive devices to a set temperature. The warm-up time depends on the initial temperature and may take up to 5 minutes for a cold unit. During warm-up, the unit blinks the two upper sample frequency lamps (44.1 and 48 LED’s)."
http://www.lavryengineering.com/pdfs/lavry-da924-manual.pdf
另外,就算那oven用上80°C,多出来的Johnson–Nyquist noise也不是那么多。
附件便有Johnson–Nyquist noise电压算式,而当中温度的部分单位是K。
室温25°C相等于298K,即使到了80°C也才353K,多出来的Johnson–Nyquist noise也是少之又少。
[ 本帖最后由 Bomb_Dance 于 2013-1-12 01:46 编辑 ] |
-
root mean square (RMS) of the noise voltage, vn, is given by
|