davidxtb 发表于 2012-8-3 14:52:00

也许会是两万元级别的扛鼎之作:AudioValve - EARTUBE MKII耳机放大器

之前的MKI版本很少有人提起,但新一代的MKII版本励精图治,增加很多RKV用家期待的功能,包括平衡输入
http://www.audiovalve.de/Eartube/Model%20Mark%20II%202012/earlogo.jpg
http://www.audiovalve.de/Eartube/pics/frontneu.JPG
: integrated stereo pure tube amp masterpiece class "A" for low impedances headphones - and speakers too ::

The new Eartube Mark IIheadphone amplifier will come out in a new and wonderful looking re-design in optic and technicial thinks.

It will be in the same heavy laser cutted chassis as our other amplifiers, with some new features ......      

1

A better and special output transformer ( PIKATRON )with the possibility of the connection for a pair of 8 ohms loudspeakers

Balance control +/- 3dB

Stereo analog volume panel meter

One pair of XLR inputs (+ only )

2 pairs of 8 ohm Speaker output terminals ( speaker efficency up tp 94 dB )
For many interested earphone-enthusiasts, who spend a lot of money on their hobby, only a melodious tube amplifier is possible as a driver. The answer to the question: „ Which do I take? “ can only say: the EARTUBE of AudioValve!

The Eartube was developed especially for the highest-quality reproduction with earphonesand serves very well impedances of 16 to 200 ohms. He unfolds his big strength with roughly 4 watts per canal in 100 ohms. For that reason he is very well suitable e.g. for the K1000 by AKG.

The Eartube is a pure tube amplifier and owns no semiconductor in the signal way. Merely the stabilization for the tube heatings and anode tensions occurs highly exactly with semiconductors.


The amplifier owns two switchable entrances with different delicacy. Thus can be connected, e.g., CD player and TUNER at the same time.

The input circuit of the amplifier owns three tubes of the Type 6N3P and prepares the signal for the output stage tubes. In this area of the circuit also the volume potentiometer with the shiftable or detachable Crossfeed filter is located, to distribute potential signal bass charge on merely one ear to both ears.



The output stages use the power Tetrode of the type: QQE 03/12 as the military version by SIEMENS and work in circuit PP with a transformer which is tuned especially to the interests of earphones.

The final tubes work constantly in Class A and are postregulated automatically optimally in the Bias closed current, so that tolerance and aging of the tubes do not matter.



The care tensions are won from a strong, free of litter, Torodial-Transfomator. The amplifier itself rests on one single two-page printed circuit board and was adapted signal-technically optimally. For this reason also the potentiometer is in the rear part of the printed circuit board to hold the signal way short. All parts on the PCB are of the best quality and selected carefully to do justice to the requirements of the reproduction in every regard. The case is from metal and prevents interferences from the outside. It is available in the colours black and silver.



Like all products of AudioValve this amplifier also distinguishes itself especially by his exceptional musicality which is based at last also on the fantastic technical values of the circuit and their stability. As a user you will be able to enjoy this product in the highest perfection for many years enthusiastically and come with it to the pleasure of fantastically detached musical reproduction with your headphones.
http://www.audiovalve.de/Eartube/2012%20mark%202/hintenweb.gif
echnicial specifications - EARTUBE basic tube amplifier model:
http://bbs.headphoneclub.com/attachments/month_1208/20120803_dc9acbab85f55b08d268OPVBB63NLrT8.jpg
As a second model of its amplifier named EARTUBE MARK II - USB. In its amp, we have installed a very populare DIGITAL audio player for USB sticks or SD cards. Its player can handle memory size up to 8 GB and supported MP3 and WAV files.An FMreseiver is integrated too. You can direct select your music titles by panel buttons on front or with the remote control. Its nice to handle and simple to use and satisfight everyone who like to hear memorized digit music from sticks .....   


DigitalAudio Player- technicial describtions and possibilities:

*Play music from any USB / sticks or SD - card up to 8 GB with MP3 or WAV format files/ FM radio integrated

*Built in RTC clock cirucit with time /alarm function

*MP3 / WAV decorder support 32–320kbps. 18-bit resolution with no missing codes, Dynamic range: 99 dB, sample rate: 48kHz

*Play/Pause, Next ,Previous ,Vol- ,Vol+ ,Stop, EQ ,Repeat ,Mute

*FAT16 or FAT32 systems supported

*Memory the song number and volume even power cut down

*With Remote control

*Power supply optional (DC 3.7V / 5V)

*Built in Amplifier Optional

*LCD display
Keys function on Pannel

Power : Long press for stanby ,and lon g press again will wake up .

Set :    Setting for Time Alarm Sleep Language Finish

VOL- : Volume down and minus for setting Time , Alarm ,and Timing swith off.

VOL+:Volumedownand PlusforsettingTime ,Alarm,andTimingswith off.

Play/Pause : Short press for Paly or Pause for USB and SD state (also for

auto-search channels and save them in FM state)
Remote Control Keys function

Power : ON/OFF    (standby )

Mode:SwitchorderwillbeUSB SD FM USB(ifhaveUSB memory and SD card) , Switch order will be USB FM USB (if only have USB memory) Switch order will be SD FM SD (if only have SD card )

PREV :Same functions as Previous Button on pannel

NEXT: Same functions as Next Button on pannel

VOL+ : Same functions as VOL+ Button on pannel

VOL-: Same functions as VOL- Button on pannel

REP:For switchingonesongrepeatorallsongrepeatinUSB/SDstate,

default is all song repeat .

*SET : Setting for Time Alarm Sleep Language Finish

MUTE: First press mute , press again will release from mute.

EQ : NORMAL, JAZZ, ROCK, POP, CLASSIC, COUNTRY

PLAY/PAUSE: For play and pause in USB/SD state , for auto-search

channel and save them in FM state.

Button 0-9 : select song in USB/SD state, if the song number over 9 , just input the numbers in series.


After the summer vacation we will have as a new unit an digital audio player who can handle USB - sticks or SD - memory cards up to 8 GB with music files in MP3 and WAV file format. Also its unit have a FM receiver. Its functions all can be handle from front panel buttons or from the remote control.

The best of all is - its unit has an MM - phono amplifier integrated too. The technologie is very popular"OLD SCHOOL" transistor technology and very very good to combine with a vinyl turntable player.

On the front panel its goods is a selector to select between PHONO - or - DIGITAL PLAYER mode, so the back panelo its model have only 2 pairs of RCA jackets ...

MM input from turn table
One line OUTPUT for the pre amplifier.
We deliver its unit with an universal main power adapter for 100 - 250 VAC and a remote control.



tech. details:

1) digital - player, same details like the EARTUBE MK II - USB

2) MM - phono moule

output impedance: 450 ohm
input impedance: 47 kOhm
RIAA accuracy: +/- 0,2 dB
noise: -72dB
distortion:0,014% ( 1V rms output signal )
gain: 50dB
http://www.audiovalve.de/Eartube/usb/phono/riaa.jpg
http://www.audiovalve.de/Eartube/usb/frontweb.jpghttp://www.audiovalve.de/Eartube/usb/remote.jpg

[ 本帖最后由 davidxtb 于 2012-11-26 00:01 编辑 ]

davidxtb 发表于 2012-8-3 14:57:39

就EARTUBE MK1的结果来说,两者恐怕还是类似的布局,牛在前面,低阻适配器在后面

http://bbs.headphoneclub.com/attachments/month_1008/20100824_f67d496b7d4ae1773e72KRBGwAKD3MrJ.jpg如此设置,反而是将电源开关所收到的干扰因素减小,而将低阻适配器放在后面,并且在后部设置功放的输出端口,也是为了方便驱动KK或者箱子的需要的同时确保前面板的美观简介 就外观来说,是巨大的进步RKV最终将这款给CORDA 代工的产品外观改成自己传统的风格了,而且颇巨现代感

http://www.hifi.com.tw/images/product/corda_eartube_l.jpg

[ 本帖最后由 davidxtb 于 2012-8-3 15:00 编辑 ]

davidxtb 发表于 2012-8-3 15:02:05

http://www.audiovalve.de/Eartube/pics/frontneu.JPG

http://www.audiovalve.de/Eartube/pics/hintenneu.JPG

[ 本帖最后由 davidxtb 于 2012-8-3 15:06 编辑 ]

sf15 发表于 2012-8-3 15:05:03

好漂亮的机器啊:)

SHANDP 发表于 2012-8-3 15:10:43

跳楼去

davidxtb 发表于 2012-8-3 15:11:33

估计不会入手玩这台二房了,只能等着有米的人上了

声辉现在是22500港币,也就是一万七八千的样子,看来是要取代RKV MKII的位置了,价格基本上是一样的


管子的话,应该还是3只 6N3P和两只 GU17

6N3P的管子有WE 2C51/396A 5670这些可以替换2C51 = 396A = 6385 = ECC42 = 6N3P tube


GU17的直代管子:QQE03/12, RS1023, 6360, 8457 and 8458 ,GU17 = QQE03/12 = RS1023 = RS1029 = CV2798.这个管子比较特殊,它是小功率孪生束射四级对管,其帘栅级是在管内部连在一起的

[ 本帖最后由 davidxtb 于 2012-8-4 21:08 编辑 ]

盐咕巴 发表于 2012-8-3 15:11:46

期待吃螃蟹的。。。。。

雨落清晨 发表于 2012-8-3 15:13:09

难怪熊大连rkv都出了,顶上了这个啊,坐等熊大螃蟹

davidxtb 发表于 2012-8-3 15:27:25

我出RKV是因为要入大马三而已,可不是因为这个

wangshd 发表于 2012-8-3 15:28:31

mark下,继续关注。

davidxtb 发表于 2012-8-3 15:30:30

就二房来说,两万元价位的,平衡的胆二房确实没有多少选择

AUDIOVAVLE这台算是性价比之选了,希望能尽快听到它的声音。

苏苏 发表于 2012-8-3 15:36:45

:lol :time:

psman 发表于 2012-8-3 15:38:17

这个是台带耳机孔的功放,不过好像没有平衡耳机口。

Lion_Heart 发表于 2012-8-3 15:42:55

等熊大作报告:lol

airfancy 发表于 2012-8-3 16:02:18

耳机口貌似是牛出的,好东西啊
页: [1] 2 3 4 5
查看完整版本: 也许会是两万元级别的扛鼎之作:AudioValve - EARTUBE MKII耳机放大器

耳机俱乐部微信
耳机俱乐部微信