那就烧吧 发表于 2013-5-16 10:40:02

原帖由 kakazi 于 2013-5-16 00:25 发表 http://bbs.headphoneclub.com/images/common/back.gif
我認為是純種DAC和ALL in ONE 的分別! :L 就算通道再多, 我都是用到DAC中的2條通道:L , 多出來的真用不到, 所以決定先買LYRA 2 玩玩:lol :lol :L
其實Prism Sound 這品牌是我香港一位音樂製作人建議我用的,那一位就 ...

那你应该买Lyra1, 1模拟输入+1模拟输出(lyra2则是1输入+2输出),一个Mic输入(Lyra2则是2Mic输入),跟Lyra2相比还少了Wordclock in/out,AES3 in/out, RIAA(录制黑胶比较有用?),

但价格下来至少有5KRMB,我觉得除非有特殊需求,Lyra1够用了!

kakazi 发表于 2013-5-16 10:45:22

Lyra1 因為無鐘可以加,才選Lyra2,我想很多玩家選2是這個因素:lol

ziqiushi 发表于 2013-5-16 11:01:07

kakazi 发表于 2013-5-16 11:25:38

所為數碼味,本人認為是机体高分析力的聽感。但人從出生開始,就聽著慣滿是音染訊源的音樂,習慣了那種音色,有甜有潤,有厚有薄,有快有慢,各式其式,都是一種HiFi味,而數碼聲也是算是一種味,所以現在不習慣,不代表以后沒有人不喜歡,反正數碼味都也有他獨特之處。:victory: 這是小弟學習聽音響的態度:loveliness:

micro888 发表于 2013-5-16 11:32:36

DA2现在什么价格,有没有二手想收一台。

dragon 发表于 2013-5-16 11:39:37

原帖由 fseon 于 16-5-2013 09:55 发表 http://bbs.headphoneclub.com/images/common/back.gif
折腾什么转接头?模拟信号的不就TRS大三芯么,很普通的接头

TRS大三芯没办法用发烧线呀
接前级怎么搞?
我玩的话,就会定TRS转XLR or RCA的发烧转接头:lol

kakazi 发表于 2013-5-16 11:47:58

用發燒線好呀! 可調走所為數碼味!:loveliness:

kakazi 发表于 2013-5-16 11:49:54

回复 35# 的帖子

應该约5W人民B

yamuling 发表于 2013-5-16 12:27:32

貌似lyra1 是2496限制哦?

那就烧吧 发表于 2013-5-16 12:32:02

原帖由 yamuling 于 2013-5-16 12:27 发表 http://bbs.headphoneclub.com/images/common/back.gif
貌似lyra1 是2496限制哦?

不是哦, 官方规格说明书上明确标示了 Lyra1&2都是 24/192哦

那就烧吧 发表于 2013-5-16 12:33:23

DIGITAL OUTPUTS
Formats supported: Lyra 1 S/PDIF TOSLINK
Formats supported: Lyra 2 S/PDIF (RCA or TOSLINK), ADAT, ADAT S/MUX (TOSLINK), AES3 (RCA)
Sample rates: S/PDIF/AES3 44.1, 48, 88.2, 96, 176.4 and 192kHz
Sample rates: ADAT(Lyra 2 only) ADAT (8 channel): 44k1, 48k; ADAT S/MUX (4 channel): 88k2, 96k
Channel Status Full implementation, Consumer (S/PDIF) or professional (AES3)
Word-length 24 bit, or reduction to 16 bits using flat TPDF dither or Prism Sound SNS (Super Noise Shaping - four alternative shapes available)
AES3 (AES/EBU) operation: (Lyra 2 only) via S/PDIF RCA, using RCA-XLR adaptor (supplied) and AES3 mode (2V p-p, 110Ω and AES3 channel status)
Sample-rate converter (SRC):(Lyra 2 only) Selectable at S/PDIF output; output rate can be referenced to Wordclock, DI or local clock at 44.1, 48, 88.2, 96, 176.4 or 192kHz
Bit transparency Maintained in 24 bit mode (allows playback of Dolby or DTS streams to external decoder)

[ 本帖最后由 那就烧吧 于 2013-5-16 12:36 编辑 ]

那就烧吧 发表于 2013-5-16 12:36:34

DIGITAL INPUTS
Formats supported: Lyra 1 S/PDIF TOSLINK
Formats supported: Lyra 2 S/PDIF (RCA or TOSLINK), ADAT, ADAT S/MUX (TOSLINK), AES3 (XLR via supplied adapter cable)
Sample rates supported 44.1, 48, 88.2, 96, 176.4 and 192kHz
Sample rates supported: ADAT
(Lyra 2 only) ADAT (8 channel): 44k1, 48k
ADAT SMUX (4 channel): 88k2, 96k
Channel Status: Ignored
Word-length 24 bit
AES3 Operation (Lyra 2) Via S/PDIF RCA, using XLR-RCA adapter (supplied)
Sample-rate converter (SRC) Selectable at S/PDIF input; allowing input at any sample rate
Bit transparency Maintained (allows recording of Dolby or DTS streams)

那就烧吧 发表于 2013-5-16 12:38:28

SYNCHRONIZATION
System sample rates 44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz
Sync sources:
Master local, Wordclock (Lyra 2 only), DI (S/PDIF input) or ADAT (Lyra 2 only)
Local clock accuracy ±50ppm
Jitter rejection >60dB / decade above 100Hz
Internal mixer delay
(total analogue in to out) fs = 44.1kHz: 0.57ms;
fs = 48kHz: 0.52ms;
fs = 88.2kHz: 0.2ms;
fs = 96kHz: 0.18ms;
fs = 176.4kHz: 0.09ms;
fs = 192kHz: 0.08ms;

木真 发表于 2013-5-16 13:47:21

这里有对比评测

http://bbs.headphoneclub.com/thread-129140-1-1.html

kakazi 发表于 2013-5-16 15:58:27

我要Lyra评测:Q
页: 1 2 [3] 4 5
查看完整版本: 入手prism sound da2最后機會

耳机俱乐部微信
耳机俱乐部微信